Water weakens leather and causes discoloration and blisters. If leather becomes wet, wipe it quickly with a dry cloth and dry it off in the shade. Please do not use warm dryer.
Please do not use the product in wet conditions, which cause discoloration or stain.
・Colors of the leather may transfer when the leather is subjected to friction. Please be careful when wearing light - colored clothes.
To conserve the natural qualities of leather, it has not been subjected to the use of pigment, only dye. Due to this, a natural discoloration will occur over time.
Please do not bring the leather into close contact with P.V.C. or other leather products for a long time. Such exposure may cause color migration or discoloration.
Due to the nature of nap-raised materials such as Suede, colour variation and loss of fibers may occur.
If you wish to clean the leather, please use an appropriate leather cleaner.
For stains on brushed leather, use a brush made for this purpose.
Please do not use general leather cleaners for brushed leather.
Attention on Products Using Cotton and Synthetic Fibers
Due to their heat-sensitive properties, please do not bring synthetic fibers like nylon or polyester into close contact with high temperatures.
Please note that nylon and polyester are materials which fade and turn yellow and in which fabric ageing is likely to occur in light colors.
Colors of cotton products transfer when subjected to friction. Please be careful when wearing light -colored clothes.
Attention on products using materials processed with P.V.C. and PU.
Please note that a product might turn yellow if left under direct sunlight for a long time. ・Please do not bring it into close contact with plastic bags, metal and leather items to avoid color transfer.
Durability and length of product life is dependant on usage and storage, however air humidity and friction should be avoided as this will result in degradation of the product over time.
To clean dirt from the surface, wipe with a soft cloth made from a material such as flannel. Note that using hard materials will cause damagesthe surface.
The coating may be damaged if subjected to repeated strong friction.
Attention on Brass Fittings
The surface of brass fitting is not processed and consequentially a change of color and rust can occur depending on usage. This is a natural process connected to the nature of brass.
Attention on All Products
Please purchase the exclusive waterproof spray and use it to remove stains every 1-2 months (apart from wax coated materials). It is necessary to check the material to make sure that stains or blurring of color will not occur.
Due to the nature of the materials used in this product, when friction is applied it may result in pilling. When wearing garments constructed from soft materials please take care to avoid friction.
Be careful of damaging clothing on the edge of the zipper / clasp.
Please do not keep the product under conditions of direct sunlight or fluorescent lights in order to prevent changes of color.
Please do not leave the product in the places of high temperature and high humidity, as it may cause mold and rust.
Please do not wash the product with water or hot water without taking it apart.
Please do not use benzine and paint thinner.
Items with prints and reflective parts constructed from glass particles are susceptible to damage when subject to repeated friction. Once damaged it is not possible to repair.
Welded metal parts may be subject to natural long-term deterioration. Please accept the possibility that this deterioration will be not be repairable.
Be aware that contactless bank cards and travel cards may not work when placed in close proximity to parts containing magnets.
Consider the use and functionality of the item and avoid usage in situations that are not suited to the item's purpose.
Treatment method for leather goods
General Leather Parts
Remove any light surface light dirt with a small dry cloth or an eraser.
After water exposure, dry the item in a well ventilated area, in the shade, and apply a small light cloth to the surface to remove moisture.
In the event of water stains apply a soft cloth lightly soaked in lukewarm water.
Dry in the shade in a well ventilated place.
Dirt may be removed by the usage of the specialist brush.
Use a specialist leather cleaner designed for napped or raised materials. ・In the event of loss of the raise of fabric, lightly apply sandpaper to the item.
Treatment for fibrous materials
Light dirt or dust may be removed through the application of a dry cloth or an eraser. ・Due to the natural material of the cotton, friction with other materials may result in color transfer. If product becomes wet, wipe it quickly with a dry cloth and dry it off in the shade.
Remove stains from light dirt or dust with a dry cloth or brush.
Dirt such as finger marks may be removed by using a soft brush lightly applied with a watered-down synthetic detergent.
Please be careful when using bleach as this may result in discolouration and fading.
Please refrain from washing with hot water or in a washing machine.
Return and Exchange
Returns are only due as a result of the delivery of a defective product or due to an accident in delivery.
Returns or exchanges are not accepted for reasons such as size, or perceived discrepancies with images online etc.
Due to the hand-crafted nature of our products, returns or exchanges are not possible for reasons related to the natural differences between each individual item e.g. leather feel, colour inconsistencies, print etc).
Returns and exchanges are not permitted for any discolouration of metal parts during the coating process.
Returns must be sent within 7 days of purchase. Please contact before returning otherwise your return will not be accepted.
*Please be careful as returns or exchanges will not be accepted when:
The item lacks original tags.
The item shows signs of usage (to be judged by master-piece).
The item was purchased more than 7 days prior to the date of return.
Please contact the store where the item was purchased. We will contact the factory for an estimate and inform you subsequently.
It is not possible to make design changes during repair.
Print related damage cannot be repaired.
Damage requiring welding may render an item impossible to repair.
Discolouration of fabric and leather cannot be repaired.
We cannot be responsible for cleaning dirty items
Due to the nature of the fault, sometimes it is not possible to repair the item.